LED strip with motion sensor - IP65, three lengths up to 3 meters

LED Strip - Light that turns on automatically when motion is detected

The sensor detects motion and automatically switches on the strip, so you do not have to search for a switch. Three modes are available: constant light, day mode and night mode. The strip is flexible, can be cut to size and is protected against water in accordance with IP65.

Why choose this LED strip?

There is double-sided adhesive tape on the back, allowing the strip to be attached directly to a stair stringer, the underside of a cabinet or a door frame. It is available in 1, 2 and 3 metres, optionally in warm white or cool white. Power is supplied by four AAA batteries or via USB.

• Motion sensor: Switches on when motion is detected, with three modes for constant light, day and night.
• Cuttable and flexible: The soft strip follows edges and curves and can be cut to size.
• Adhesive mounting: Double-sided adhesive tape on the back for installation without drilling.
• IP65: Protected against splashing water, making it suitable for bathrooms and covered outdoor areas.
• Dimmable: The brightness can be adjusted using the included remote control.

This provides light wherever a fixed light would be too complicated to install.

On the stairs, the strip runs beneath the handrail edge and outlines the steps. In the wardrobe, it sits beneath the top shelf and illuminates the back rows. In the hallway, one metre is enough to make the path between the bedroom and bathroom visible.

Specifications

• Material: PVC
• Power supply: 4 x AAA batteries or USB, 5 V
• Protection rating: IP65
• Lengths: 1 m, 2 m or 3 m
• Service life: approximately 5000 hours

Bring light to the dark areas of your home.