Tube bender for 3 to 6 mm – clean bends with a 15 mm radius

Pipe bender for 3 to 6 mm – a clean bend even in tight spaces

A compact hand bender made of aluminum alloy for 3, 4.75, and 6 mm tubes in aluminum, brass, or copper. The bending radius is up to 15 mm, producing a tight bend without kinks. The tool measures 14.5 × 7.5 cm and fits in any toolbox.

Why choose a pipe bender?

Bending a thin tube by hand almost always creates a kink in the wrong place. In a bending form, the material follows the curve in a controlled manner and retains its cross-section. Because the tool is small, you can also use it inside cabinets or behind panels.

• Three sizes in one: for 3, 4.75, and 6 mm tubes
• Bending radius up to 15 mm: a tight bend that keeps the tube round
• Aluminum alloy: strong enough for copper and brass while remaining lightweight
• Compact dimensions: 14.5 × 7.5 × 3.2 cm, easy to use even in tight spaces
• Manual operation: no power or vise required

A bend that looks as though the tube was supplied that way.

Place the tube in the groove matching its diameter and clamp it securely before turning. Bend it in one smooth motion to the desired angle; bending it back afterward weakens the material. Deburr the end of the tube before making the bend.

Specifications

• Aluminum alloy
• Dimensions: 14.5 × 7.5 × 3.2 cm
• suitable for 3, 4.75, and 6 mm tubes
• maximum bending radius: 15 mm

Insert the tube and make your first bend.